MADRIX Forum

Hi skypoint, Welcome to the MADRIX forum! Please double check that all devices are working in the same IP address range and if the Showtec interface is able to work in the 192.x.x.x IP address range. I recommend to set the subnet mask to 255.255.255.0 if you use the IP address range 192.168.5.X for ...

Hi Kdry, Welcome to the MADRIX Forum! What type of LED strip is recommended for best effects without overkill? - Sorry, but this hard to say from our side, there are simply too much products on the market and it is hard to evaluate them. - Please have a look at our powerful pixel tape driver, which ...

Hi ijveen, Please double check if you have the following drivers installed under "C:\Windows\SysNative\drivers\": - multikey.sys - vusb.sys If yes, please uninstall the software, which is using those drivers. Afterwards you should be able to use MADRIX 5 again. If this is not the case, ple...

Hi DWD,

You might could achieve this using the S2L Shapes or S2L Tubes effect. Have you tried those effects already?

Hi CoolB, This is great to hear! The limits were just an example. There are newer firmware versions available for the MADRIX AURA and ORION: - MADRIX AURA firmware 1.09.7403 - MADRIX ORION firmware 3.01.7385 Here you can download MADRIX 5.4f, which includes the latest firmwares: https://www.madrix.c...

Hi egrosshans, To further analyze the issue please send us the used MADRIX 5 setup and a MADRIX 5 logfile to info[at]madrix[dot]com. To save the logfile please start MADRIX and select "Tools" > "Logfile...", click the button "Save As..." and enter a name for the logfile...

Hi CoolB, Which MADRIX AURA and MADRIX ORION firmware do you use? You can find this information under "Device Information" for the ORION and for the AURA on the "Information" page. Are the sensors connected to different ORION pins? Can you share a screenshots of the used AURA and...

Issue: When running MADRIX 5 on an integrated graphics card (which is not recommended from our side!), the Previews for example appear with green lines or an "Invalid OpenGL" message will be displayed instead of the actual Preview. Possible reasons for the issues: - The Graphics card does...

Hi albert chen, Welcome to the MADRIX forum. It seems there is a space missing between the HTTP command and "GET". Therefore the command string should look like this: GET /remote.cgi?Intensity0 HTTP/1.10D0AHOST:10.84.2.1840D0A0D0A or GET /remote.cgi?Intensity0 HTTP/1.1\r\nHOST:10.84.2.184\...

Hi CHoggard, Welcome to the MADRIX forum! Sorry, but at the moment MADRIX is only able to control up to 4 color channels (RGBW). But there is a little worka-round: You could create a two Fixture Profiles with the Fxture Editor: - For example the first one consists of 5 channels: 1 Red 2 Green 3 Blue...