Select your language

 

MADRIX NEBULA

MADRIX NEBULA

MADRIX NEBULA

The versatile LED pixel-tape driver to directly control a wide range of digital LEDs.

 

 

 


Downloads & Documents

Find all brochures, drivers, firmware updates, user manuals, and more here:

Download


New firmware 6.0:
12 Universes Of Output

 

 

 

Worldwide MADRIX NEBULA Projects

 

 

Have you heard about the creative freedom that LED pixel tape promises?


 

MADRIX NEBULA delivers on that promise. This output controller directly connects to a wide range of digital LEDs.

It supports over 70 ICs, each usually offering several frequencies. With regular additions to this list, you are free to choose the best available solution for any current, future, or maintenance work.

The many options to wire power, data, and integrate the device allow you to face the most challenging installs. While our world-class support team is here for you, highly detailed illustrations in the manual are there with you.

And despite the serial nature of the signal, MADRIX NEBULA makes sure that not a single one of the 2,048 individual RGB pixels lags behind.

MADRIX NEBULA empowers new designs for you to create exciting experiences.

 

Average Hardware Failure And Return Rate
(Last Update: December 2023)
0.08 %

 

 

MADRIX NEBULA

MADRIX NEBULA

MADRIX NEBULA

 

 

The MADRIX NEBULA directly connects to your LED pixels. This advanced SPI decoder receives control data over Ethernet network or USB and is built to provide excellent image quality.

 

SPI Converter & Direct Connection
Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal.

Quality Output Of 12 Universes
Each device drives up to 2,048 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports.

 

Art-Net / Streaming ACN / USB
Network data is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. In addition, simply connect to MADRIX 5 over USB.

Sync Mode & Daisy-Chain Support
MADRIX 5 and MADRIX hardware allow you to fully synchronize Art-Net data for all ports and across devices to get an optimal image on the LEDs without visual interruptions. 2 Ethernet ports allow linearly daisy-chaining several devices together.

 

Designed For DIN Rails Or Walls
Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 9 indicators quickly show the device status with the option to turn them off.

Invaluable Features
The device is ready within seconds after startup. HTP merging is automatically available for two Ethernet sources. Its firmware can be updated for future enhancements. Access and change specific device settings using the built-in web configuration page.

 

 

Supported LEDs
APA101, APA102, APA104, APA106, FW1935, GS8206, GS8207, GS8208, GW6201, GW6205, LB1908, LPD1882S, LPD6803, LPD8806, MBI6024, MBI6120, MY9291, P9883, SJ1221, SK6112, SK6805, SK6812, SK6813, SK6822, SK9816, SK9822, SK9826, SM16703, SM16704, SM16716, TLC5973, TLS3001, TLS3008, TM1803, TM1804, TM1809, TM1812, TM1814, TM1829, TM1934, UCS512B3, UCS1903, UCS2603, UCS2903, UCS2904, UCS2904B, UCS5603, UCS5603A, UCS8903, UCS8904, UCS9812S, VS17822, WS2801, WS2803, WS2811, WS2811F, WS2811M, WS2811S, WS2812, WS2812B, WS2812C, WS2813, WS2814, WS2814F, WS2815, WS2818, WS2818M, WS2821, WS2821 Addressing, WS2822S, WS2822S Addressing

As of December 2023. Additional LED types will be supported with future firmware updates. Multiple frequencies are often available per type.

 

 

MADRIX NEBULA

MADRIX NEBULA

 

    Connectivity
  • 2x OUT (via pluggable screw terminals)
  • 2x RJ45 Ethernet ports
  • 1x USB port
  • 1x Power (via pluggable screw terminal)
    Package Contents
  • 1x MADRIX NEBULA
  • 1x Set of pluggable screw terminals (2x 4-pin and 1x 2-pin)
  • 1x USB 2.0 cable (certified)
  • 2x Wall-mount brackets
  • 1x Technical manual / quick start guide

 

 

 

Made in Germany

 
 

5 Years of Warranty

 
 

Ecological Sustainability

 

 

Technical Specifications

Supply Of Power

DC 5 V – 24 V; over
A) 2-pin, pluggable screw terminal (12 A max.), B) 5 V USB, C) Port 1 or 2 sourced from LEDs;
6 A max. load per port when supplying through to LEDs

Power Consumption

< 1.5 W (300 mA) during normal operation (500 mA max. fused)

BTU/h

5.73 during normal operation

Network Protocols

Art-Net (I, II, 3, 4, incl. ArtSync), Streaming ACN (sACN / ANSI E1.31)

RDM Role

Acts on commands and replies to requests with its own status and sensor data via ArtRdm (RDM Responder)

Data Output

Firmware ≤ 5.XX: 8x 512 channels SPI TTL (Max. output per port: 680 RGB LEDs / 512 RGBW LEDs / 2,048 1-channel LEDs)

Firmware ≥ 6.00: 12x 512 channels SPI TTL (Max. output per port: 1,024 RGB LEDs / 768 RGBW LEDs / 3,072 1-channel LEDs)

Supported LEDs

APA101, APA102, APA104, APA106, FW1935, GS8206, GS8207, GS8208, GW6201, GW6205, LB1908, LPD1882S, LPD6803, LPD8806, MBI6024, MBI6120, MY9291, P9883, SJ1221, SK6112, SK6805, SK6812, SK6813, SK6822, SK9816, SK9822, SK9826, SM16703, SM16704, SM16716, TLC5973, TLS3001, TLS3008, TM1803, TM1804, TM1809, TM1812, TM1814, TM1829, TM1934, UCS512B3, UCS1903, UCS2603, UCS2903, UCS2904, UCS2904B, UCS5603, UCS5603A, UCS8903, UCS8904, UCS9812S, VS17822, WS2801, WS2803, WS2811, WS2811F, WS2811M, WS2811S, WS2812, WS2812B, WS2812C, WS2813, WS2814, WS2814F, WS2815, WS2818, WS2818M, WS2821, WS2821 Addressing, WS2822S, WS2822S Addressing

As of December 2023. Additional LED types will be supported with future firmware updates. Multiple frequencies are often available per type.

Ports

2x ports (Via 2x 4-pin, pluggable screw terminals)

Ethernet

2x RJ45, Auto MDI-X, daisy-chain support, 10/100 MBit/s (Compatible with 1 GBit/s)

Ethernet Switch

Lookup Table (ALU) for 1,024 unicast MAC addresses

USB

1x port, USB 2.0, type-B female socket

Handling

5 status LEDs (+ 4 network status LEDs)

Case

Non-conductive, V-0 flammability rating (UL94 test method), designed for 35 mm DIN-rails or wall mounting

Dimensions

90 mm × 70 mm × 46 mm (3.54˝ × 2.76˝ × 1.81˝) (Length × Width × Height)

Weight

110 g (0.24 lb) | 132 g (0.29 lb) incl. screw terminals and wall mounts

Temperature Range

-10 °C to 70 °C (14 °F to 158 °F) (Operating) | -20 °C to 85 °C (-4 °F to 185 °F) (Storage)

Relative Humidity

5 % to 80 %, non-condensing (Operating / Storage)

IP Rating

IP20

Certificates

CE, EAC, FCC, RoHS

Warranty

5 years of limited manufacturer's warranty

 

It Is Your Choice
MADRIX products are proudly designed, engineered, and made in Germany. We are creating high-quality products for you that are easy to use and reliable. Innovative features will bring you the best results. And opting for such highly manageable products means that you can drastically reduce on-site support; and thus your time and costs. But it does not stop there.

We Have Made Ours
We feel that our responsibility is more than just creating prime products. We are also responsible of how we create them. We are intentionally choosing eco power for our office. We have deliberately chosen cardboard as the main part of our product packaging, since it is a renewable resource. In this way, we are also actively minimizing our plastics usage to reduce the environmental impact.

 

MADRIX – Made in Germany

By

inoage