MADRIX Forum • How to synchronize lighting effects across multiple LED luminaires
Page 1 of 1

How to synchronize lighting effects across multiple LED luminaires

Posted: Fri Mar 15, 2024 8:37 am
by JayAlbert
I'm thrilled to be a part of this vibrant group of lighting enthusiasts. I have a question regarding the Madrix software: How can I synchronize the lighting effects across multiple LED fixtures to create a cohesive visual display? Any tips or tutorials that you could point me towards would be greatly appreciated.

Re: How to synchronize lighting effects across multiple LED luminaires

Posted: Fri Mar 15, 2024 1:14 pm
by Schulze
Hi JayAlbert,

Welcome to the MADRIX Forum!

You can achieve this by using an Art-Net interface, which supports ArtSync for the data output. All our interfaces support the ArtSync feature. You can enable ArtSync in the Device Manager of MADRIX 5. Therefore connect your interface and navigate to "Preferences" > "Device Manager" > "Art-Net" and enable the ArtSync checkbox.

Here you will find further information (part - Sync Mode):
https://help.madrix.com/m5/html/madrix/hidd_device_page_net.html?zoom_highlightsub=artsync
https://help.madrix.com/tutorials/m5/HTML/hidd_connecting_madrix_5_with_art-n.html

The content (effect) needs to be mapped on the complete matrix or a desired range of fixtures.

Learn more about the "Map" feature in MADRIX 5:
https://help.madrix.com/m5/html/madrix/hidd_map_dialog.html?zoom_highlightsub=mapping
https://help.madrix.com/tutorials/m5/HTML/hidd_layer_mapping.html
https://help.madrix.com/tutorials/m5/HTML/hidd_create_fixture_groups.html
https://help.madrix.com/tutorials/m5/HTML/hidd_layer_mapping_with_fixture_gro.html

Re: How to synchronize lighting effects across multiple LED luminaires

Posted: Wed Apr 03, 2024 10:14 am
by Counconect
Thanks for the source