LED strip DMX overflow / overlap

Post Reply
lightlab
Posts: 8
Joined: Mon Dec 26, 2016 8:26 am
Location: Whales, UK

LED strip DMX overflow / overlap

Post by lightlab » Fri May 12, 2017 4:23 am

I'm using Resolume Arena 5, I don't own a Madrix key
I have an LED matrix, 35w x 13h
On the 5th row, the 512 DMX addresses runs out, and 1 pixel is getting signal from 2 lumiverses.
How can I handle the overflow to properly map my pixels?
Last edited by lightlab on Fri May 12, 2017 5:51 am, edited 3 times in total.

lightlab
Posts: 8
Joined: Mon Dec 26, 2016 8:26 am
Location: Whales, UK

Re: Madrix LED matrix with Resolume

Post by lightlab » Fri May 12, 2017 4:41 am

EDIT: Cannot change number of addresses in lumiverse

Fritzsche
Support
Posts: 714
Joined: Mon Oct 05, 2009 5:26 pm
Contact:

Re: LED strip DMX overflow / overlap

Post by Fritzsche » Fri May 12, 2017 2:21 pm

Hi.
.
1) Please make sure to use the latest firmware. You can use the MADRIX Software in demo mode if necessary to update the device.
.
2) Call the built-in web configuration tool by accessing the IP address of the device.
.
3) Set up 'Channels Per Universe' to 510.

Please find more details here:
http://help.madrix.com/m3/html/madrix/h ... ebula.html
.
Thank you!

Post Reply
cron
Back to top