sACN / E1.31 unicast support

This is the forum, where you can add your wishes and feature requests.

Moderator: MADRIX Team

Post Reply
mattm
Posts: 8
Joined: Tue Jul 31, 2012 9:37 pm

sACN / E1.31 unicast support

Post by mattm » Wed Jul 03, 2013 6:05 am

Hi, just wondering whether Madrix 3 will add support for unicast addressing under sACN/streaming ACN/E1.31?

Thanks,
Matt

User avatar
Wissmann
Developer
Posts: 731
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: sACN / E1.31 unicast support

Post by Wissmann » Wed Jul 03, 2013 7:28 am

Not in Version 3.0, sorry.
LEDs are nothing without control ;-)

billinsofl
Posts: 13
Joined: Tue Nov 01, 2011 9:26 am

Re: sACN / E1.31 unicast support

Post by billinsofl » Sat Dec 21, 2013 5:31 pm

I would also like unicast support added!!!

billinsofl
Posts: 13
Joined: Tue Nov 01, 2011 9:26 am

Re: sACN / E1.31 unicast support

Post by billinsofl » Sat Jan 18, 2020 8:05 pm

Has Unicast been added in any version?? I previously asked if it was possible to include support for LIFX bulbs. There’s hardly any reason to upgrade again with no LIFX or E1.31 Unicast.

Multicast completely crippled the network, which means I need more hardware or complex configurations.

User avatar
Wissmann
Developer
Posts: 731
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: sACN / E1.31 unicast support

Post by Wissmann » Sun Jan 19, 2020 10:56 am

Hi,
the unicast for sACN was added in MADRIX 5.0 | May 07, 2018
https://www.madrix.com/products/software/releases#M50
and
Phillips HUE ist supported as well
http://help.madrix.com/m5/html/madrix/i ... s_hue.html
LEDs are nothing without control ;-)

Brucedg
Posts: 2
Joined: Thu Jan 30, 2020 6:05 pm

Re: sACN / E1.31 unicast support

Post by Brucedg » Thu Feb 27, 2020 1:44 am

Thanks for this interesting info :)

Bruce
Exterminator Washington DC

User avatar
Wissmann
Developer
Posts: 731
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: sACN / E1.31 unicast support

Post by Wissmann » Thu Feb 27, 2020 9:46 am

You are welcome!
LEDs are nothing without control ;-)

Post Reply
Back to top